THREADED FITTINGS
Threaded Tight, Pressure-Proof.
HEX NIPPLE
Stainless Steel (Gr. 304, 316, 316L) Hex nipples typically have male threading on both ends of a hexagonal bolt shape in the centre. This allows for easy torqueing, tightening, or loosening using a wrench.
Sizes:1/8″ to 3” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
GREASE NIPPLE
A Grease nipple is permanently installed by a taper thread, leaving a nipple connection that a grease gun attaches to. The pressure supplied by the grease gun forces a small captive bearing ball in the fitting to move back against the force of its retaining spring.
Sizes:M6 to M12 (Metric) ; 1/8″ to 3/4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
HOSE NIPPLE
A Hose nipple is a fitting which features a male threaded connection on one end and a hose barb on the other. The hose barb may be the same size as the pipe connection or it may be reduced.
Sizes:1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED TEE
A Threaded Tee is a kind of pipe fitting that is used in the place where three inlet or outlet connections meet together at 90°. That is to say, straight Tee and reducing Tee are both available. Available in both Male and Female Threads.
Sizes: 1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED ELBOW
A Threaded Elbow is a kind of pipe fitting that is used in the place where two inlet or outlet connections meet together at 90°. That is to say, straight Elbow and reducing Elbow are both available. Available in both Male and Female Threads.
Sizes: M2 to M36
Material: Stainless Steel (Gr. 304, 316)
BARREL NIPPLE
A Barrel Nipple has a short distance of unthreaded pipe between the two threaded ends, depending on how far apart the attached fittings are to be. In other words, there is a short length of pipe with male pipe threads at both ends for connecting other fittings.
Sizes: 1/8″ to 4” (NPT, BSP, BSPT); 2”Long to 12” Long
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED CROSS
A threaded Cross is a kind of pipe fitting that is used in the place where four inlet male connections meet together at 90°. That is to say, straight cross and reducing cross are both available. Available only in Female Thread.
Sizes:1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED UNION
Threaded Unions are primarily used for maintenance and installation purposes. It is a screwed joint design and it consists of three interconnected pieces. Two internally threads and a centrepiece that draws the ends together when rotated. Available only in Female Thread.
Sizes: M2 to M36
Material: Stainless Steel (Gr. 304, 316)
THREADED BUSH
A Bush is a pipe fitting which is threaded on both the inside and the outside so that it can be used to connect two pipes (or other fittings) of different sizes.
Sizes:1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
CHECK NUT
A check nut (also known as Lock Nut or Jam Nut) is used to ensure that a nut, once installed, will stay in place. Check Nut is usually thin and used in instances where there is a high probability of the first nut shaking or vibrating loose. These nuts are designed and used to prevent the first nut from becoming loose and potentially causing damage or injury when using a device. It is a secondary nut, screwing down upon the primary nut to secure it.
Sizes:1/8” to 4” (NPT, BSP)
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED COUPLING
A threaded coupling (also known as Socket) is a short length of pipe or a tube which has a female threading from both sides which allows connecting a male threaded fitting. Usually comes in two types – Half Coupling and Full Coupling.
Sizes:1/8″ to 6” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
HEX COUPLING
A Hex Coupling (also known as Extension Nut) is a threaded fastener for joining two male threads. The outside of the fastener is usually a hex so a wrench can hold it.
Sizes: 1/8″ to 3” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
THREADED PIPE CAP
A Threaded Pipe Cap has decreased sides, which offers a near fit. A few of these fittings can be utilized either as a cap or a plug. Tapered caps and plugs are multi-functional and go well with male and female NPT/BSP threads, straight tubes and bars.
Sizes:1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
HEAD HEX PLUG
A Plug is one sided male threaded fitting with a hex so a wrench can hold it. Plug is a type of pipe fitting which is defined as a part used in a piping system.
Sizes: 1/8″ to 4” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)
ADAPTOR
Adaptor typically has male threading on one end while has female threading on other end. An adaptor helps connecting male and female connection.
Sizes: 1/8″ to 3” (NPT, BSP, BSPT)
Material: Stainless Steel (Gr. 304, 316, 316L)